Whether or not you decide to have the air ducts in your home cleaned, committing to a good preventive maintenance program is essential to minimize duct contamination.

To prevent dirt from entering the system:

• Use the highest efficiency air filter recommended by the manufacturer of your heating and cooling system.
• Change filters regularly; if they become clogged, change them more frequently.
• Be sure you do not have any missing filters and that air cannot bypass filters through gaps around the filter holder.
• When having your system maintained or checked for other reasons, be sure to ask the service provider to clean cooling coils and drain pans.
• During construction or renovation work that produces dust in your home, seal off supply and return registers and do not operate the heating and cooling system until after cleaning up the dust.
• Remove dust and vacuum your home regularly. (Use a high efficiency vacuum (HEPA) cleaner or the highest efficiency filter bags your vacuum cleaner can take. Vacuuming can increase the amount of dust in the air during and after vacuuming as well as in your ducts).
• If your system includes in-duct humidification equipment, be sure to operate and maintain the humidifier strictly as recommended by the manufacturer.

Moisture should not be present in ducts. Controlling moisture is the most effective way to prevent biological growth in air ducts.

Moisture can enter the duct system through leaks or if the system has been improperly installed or serviced. Research suggests that condensation (which occurs when a surface temperature is lower than the dew point temperature of the surrounding air) on or near cooling coils of air conditioning units is a major factor in moisture contamination of the system. The presence of condensation or high relative humidity is an important indicator of the potential for mold growth on any type of duct.

Controlling moisture can often be difficult, but here are some steps you can take:

• Promptly and properly repair any leaks or water damage.
• Pay particular attention to cooling coils, which are designed to remove water from the air and can be a major source of moisture contamination of the system that can lead to mold growth.
• Make sure the condensate pan drains properly. The presence of substantial standing water and/or debris indicates a problem requiring immediate attention.
• Check any insulation near cooling coils for wet spots.
• Make sure ducts are properly sealed and insulated in all non-air-conditioned spaces (e.g., attics and crawl spaces). To prevent water condensation, the heating and cooling system must be properly insulated.